Home » Innovacar Fra-Ber info » What are glazes? Fra-Ber Guides

GLAZE: ALWAYS AND FOREVER.

 

G1 Glossy can be used whenever you need to enhance the natural brightness of the chassis. It’s not harmful or abrasive on the surfaces, as it’s a state-of-the-art product containing nanopolymers.
Apply it at the end of a washing cycle, upon redelivering a vehicle or any time you want a vehicle to shine as new.
We recommend applying G1 Glossy at the end of each washing cycle, immediately after the polishing stage and after having decontaminated and washed the surface using clay bar.
Remember that for optimal results, it’s good practice to apply the glaze after the sealant or wax (such as SC0 Hydro Sealant) has dried.
This way, the sealant will come into contact with the chassis, thus ensuring long-lasting brightness.

 

APPLICATION INSTRUCTIONS: SIMPLE AND FAST.

 

To apply G1 Glossy, we recommend using Fra-Ber black and soft buffer. However, thanks to its formula, G1 Glossy can be also applied manually, as it’s easy to process and doesn’t need single panel application.

Random orbital polisher.

  1. Choose a suitable backing plate and centre the black buffer.
  2. Apply three drops of product, forming a triangle at the end of the buffer.
  3. Outline a work surface (60 x 60 cm).
  4. Turn the polisher on at a low speed (1-3), distributing the glaze on the entire area.
  5. Start polishing the chassis from a corner of the outlined surface, setting the polisher speed to 4.
  6. It would be ideal to apply a 3 Kg weight to the head of the polisher during this operation.
  7. Carry out this operation in a controlled way making constant movements from one corner to the other (4 cm – 8 cm per second).
  8. Repeat this same operation in the opposite direction.
  9. Keep distributing the glaze on the entire surface.
  10. Proceed polishing the area but in the opposite direction.
  11. Turn the polisher off when this step is complete.
  12. Remove the excess product using our special Micron Buffing cloth.

Carry out all these steps for the rest of the vehicle until you obtain an optimal result.

Rotary polisher.

  1. Choose a suitable backing plate for the polisher and centre the black buffer.
  2. Apply three drops of product, forming a triangle at the end of the buffer.
  3. Outline a work surface (60 x 60 cm).
  4. Distribute the product evenly using the polisher set to off.
  5. Turn the polisher on at a low speed (1-3), distributing the glaze on the entire area.
  6. Set the polisher to a medium speed (between 700 and 900 revs).
  7. Do not apply excessive pressure to the polisher.
  8. Move the polisher in a controlled way from one corner to the other (5-10 cm per second).
  9. Repeat this same operation in the opposite direction.
  10. Distribute the glaze on the entire surface.
  11. Proceed polishing the area but in the opposite direction.
  12. Turn the polisher off when this step is complete.
  13. Remove the excess product using our special Micron Buffing cloth.

Carry out all these steps on the rest of the vehicle until you obtain an optimal result.

Manual application.

    1. Apply two drops of product inside our ergonomic applicator, Foam app.
    2. Outline a work area (60 x 60 cm). G1 Glossy is an excellent product, as it dries slowly and can be easily removed, thus allowing you to work smoothly even on larger surfaces.
    3. Evenly distribute G1 Glossy on the entire surface.
    4. Let the product penetrate slowly, making slow and circular movements.
    5. After two minutes, remove the excess product using our special Micron Buffing cloth, which must be perfectly clean.

Repeat this operation on the entire chassis.

 

NOTES AND RECOMMENDATIONS.

 

  • With G1 Glossy, you can enhance the brightness of the chassis and keep its silky effect even after a few washes.
  • G1 Glossy’s effect is temporary, especially on the chassis’ small defects. That’s why, to restore the chassis surface, we recommend following the instructions provided in our polish guide. The results will be excellent!
  • G1 Glossy is ideal to cover small imperfections on the chassis.
  • G1 Glossy can be applied to any part of the chassis, even to mouldings and plastic parts.

What do I have to apply after G1 Glossy? Nothing. G1 Glossy will make the chassis of your vehicle shine as never before.